10.1.1.1 opens the modems that iiNet and Internode supplied in Australia: the BoB Lite and BoB2, the TG-1 and the Technicolor TG-789. iiNet’s newer modems moved to 192.168.1.1. So if 10.1.1.1 just spins, try that before anything else.
- Who uses it
- iiNet BoB Lite, BoB2, TG-1 and TG-789, and the Internode TG-789.
- iiNet BoB
- No username. The password is
admin. - iiNet TG-1
adminfor both.- Internode TG-789
- Username
admin, password under GUI Login on the sticker underneath.
How to log in at 10.1.1.1
- Connect to the modem. Join its Wi-Fi or plug into one of its LAN ports. On a phone, turn off mobile data for a minute.
- Type the address. Enter
http://10.1.1.1in the browser’s address bar, not the search box. - Sign in with the modem login. Use the details in the table below, or what is printed on the sticker underneath.
- Do not use your broadband login here. The username and password from your welcome email go into the setup wizard once you are in. They do not open the modem.
Which modems use 10.1.1.1
iiNet and Internode logins
| Modem | Username | Password |
|---|---|---|
| iiNet BoB Lite, BoB2 | None | admin |
| iiNet TG-1 | admin |
admin |
| iiNet TG-789 | admin or password |
The other one of the two |
| Internode TG-789 | admin |
GUI Login, on the barcode sticker underneath |
The TG-789 row looks odd for a reason. iiNet’s help page gives the default username as password and the password as admin, which reads like the two words swapped over. Try them that way first, then the other way round. Internode’s TG-789 is different again: its password is unique to each modem and printed on the bottom, under the heading GUI Login. More detail is on the iiNet and Internode pages.
10.1.1.1 will not open
- You have a newer iiNet modem. iiNet’s own list puts the Wi-Fi Max, NetComm NL20, Sagemcom 5866, TP-Link VR1600v and Nokia FastMile on
192.168.1.1. The Cable Gateway Pro on cable connections uses192.168.0.1. - Your own router sits in front. If you plugged in a mesh system or a router of your own, your devices talk to that, not the modem. Its address is the default gateway: run
ipconfigon Windows, or open Settings, Wi-Fi and tap the (i) on an iPhone. - You typed 1.1.1.1. That is Cloudflare’s public DNS service, not a modem. It is easy to mix up, and it will never show a login page.
For the less obvious causes, see why the router page will not load when the internet works fine.
Forgot the password you set
iiNet’s advice is short: a custom modem password that has been forgotten means a factory reset. On the BoB Lite and BoB2, hold the reset button beside the power socket for 8 seconds. The TG-1’s quick setup guide says to hold its reset button for 5 to 8 seconds. Either way the modem goes back to the logins above, and you will need your broadband username and password to get it online again, so find the welcome email first. How to find your router password has a few things to try before you reset.
Other common router addresses
Addresses with a guide of their own are linked.
| Address | Typically | Used by, in our data |
|---|---|---|
192.168.1.1 | The most common address | Linksys, ZyXEL, DrayTek, Westell, Vodafone, PLDT, Converge, TalkTalk and 39 more |
192.168.0.1 | The second most common | NETGEAR, D-Link, TP-Link, Tenda, Sky, Virgin Media, NOW Broadband, Spectrum and 13 more |
192.168.1.254 | Many ISP hubs and gateways | Billion, 2Wire, Netopia, GIGABYTE, BT, EE, Plusnet, AT&T and 6 more |
192.168.2.1 | Belkin and some Canadian providers | Belkin, Edimax, SMC, Deutsche Telekom, Bell, Virgin Plus |
10.0.0.1 | Cable gateways from large ISPs | Xfinity, Rogers, Videotron |
192.168.8.1 | 4G and 5G home routers | DITO, Three, Zong |
192.168.50.1 | Current ASUS routers | ASUS |
192.168.100.1 | Fibre boxes and cable modems | Huawei, ubee, EchoLife |
192.168.3.1 | Huawei home Wi-Fi routers | Huawei |
192.168.178.1 | Every FRITZ!Box | AVM, Zen, 2degrees |
192.168.10.1 | TRENDnet, Wavlink and repeaters | TRENDnet, Wavlink |
192.168.31.1 | Xiaomi and Redmi routers | Xiaomi |
192.168.11.1 | Buffalo AirStation routers | Buffalo |
192.168.88.1 | MikroTik RouterOS | MikroTik |
10.1.1.1 | iiNet and Internode modems | iiNet, Internode |
10.1.1 and other typing mistakes
Leave a number off and type 10.1.1, and browsers read it as 10.1.0.1, which is nothing. 10.1.1.l, ending in a letter l, never loads. And 10.0.0.1 is a different address that Xfinity and Rogers gateways use, covered in our 10.0.0.1 guide.
Questions people ask
Is 10.1.1.1 the same as 1.1.1.1?
No. 10.1.1.1 is a private address inside your home, used by your modem. 1.1.1.1 is a public DNS service run by Cloudflare. One opens your modem’s settings, the other never shows a page you can log in to.
Can I reach 10.1.1.1 from outside my home?
No. Every home that uses it has its own 10.1.1.1, and none of them can be reached over the internet. You have to be on the modem’s own network.
