192.168.31.1 is the settings page of Xiaomi and Redmi routers. They also answer on router.miwifi.com, which is easier to type. There is no username. The page asks for one password, the admin password, and unless somebody changed it, Xiaomi says it is the same as your Wi-Fi password.
- Who uses it
- Xiaomi and Redmi routers, from the Mi Router AC1200 to the AX3000T and BE3600.
- Easier to type
router.miwifi.com- Username
- None. The page asks only for a password.
- Password
- The admin password set during setup. If it was never changed, it is your Wi-Fi password.
How to log in at 192.168.31.1
router.miwifi.com.- Connect to the router. Join its Wi-Fi or use a cable. On a phone, turn off mobile data and any VPN for a minute.
- Type the address. Enter
http://192.168.31.1orrouter.miwifi.comin the address bar, not a search box. - Enter the admin password. Try the Wi-Fi password first. Setup asks for a Wi-Fi password and an admin password, and offers to make them the same, which many people do.
- On a new or reset router, run setup. The page opens the setup steps instead of a login, and ends by asking for both passwords.
Which routers use 192.168.31.1
Router and network makers (1)
Some of these also answer on a name you can type instead of the number. Xiaomi: router.miwifi.com.
Xiaomi’s help pages for the Mi Router AC1200, AX1500, AX3000T and BE3600 all work this way, and the Redmi routers use the same miwifi page.
What the password is
| Situation | Username | Password to try |
|---|---|---|
| Set up, admin password never changed | None asked | Your Wi-Fi password |
| Admin password changed later | None asked | The new one. There is no way to read it back |
| New or just reset | None asked | None yet: setup asks you to create one |
Lists online give admin / admin for 192.168.31.1. Xiaomi’s routers do not use a username at all, and we found no Xiaomi source for that pair.
Forgot the admin password
Try the Wi-Fi password first. If that fails, Xiaomi’s answer is a factory reset. On the BE3600 it goes like this, and other models are similar:
- With the router switched on, press the reset button on the back for about 5 seconds. A pin helps if it is recessed.
- The indicator turns orange while it resets.
- When it turns blue again, the reset is done. Connect to the router’s default Wi-Fi and open router.miwifi.com to set it up.
The reset clears everything: Wi-Fi name, passwords, port forwarding and parental controls. If your provider gave you a PPPoE login, have it ready. How to find your router password has the options to try before you press anything.
192.168.31.1 will not open
- The Xiaomi sits behind your provider’s box. A device on the provider’s Wi-Fi cannot reach it. Join the Xiaomi network.
- It is a mesh satellite. Satellites are managed from the main router, so log in to that one.
- The address was changed. The default gateway of a connected device is the real address. On Windows run
ipconfig. On an iPhone open Settings, then Wi-Fi, and tap the (i) beside your network.
For the less obvious causes, see why the router page will not load when the internet works fine.
Other common router addresses
Addresses with a guide of their own are linked.
| Address | Typically | Used by, in our data |
|---|---|---|
192.168.1.1 | The most common address | Linksys, ZyXEL, DrayTek, Westell, Vodafone, PLDT, Converge, TalkTalk and 39 more |
192.168.0.1 | The second most common | NETGEAR, D-Link, TP-Link, Tenda, Sky, Virgin Media, NOW Broadband, Spectrum and 13 more |
192.168.1.254 | Many ISP hubs and gateways | Billion, 2Wire, Netopia, GIGABYTE, BT, EE, Plusnet, AT&T and 6 more |
192.168.2.1 | Belkin and some Canadian providers | Belkin, Edimax, SMC, Deutsche Telekom, Bell, Virgin Plus |
10.0.0.1 | Cable gateways from large ISPs | Xfinity, Rogers, Videotron |
192.168.8.1 | 4G and 5G home routers | DITO, Three, Zong |
192.168.50.1 | Current ASUS routers | ASUS |
192.168.100.1 | Fibre boxes and cable modems | Huawei, ubee, EchoLife |
192.168.3.1 | Huawei home Wi-Fi routers | Huawei |
192.168.178.1 | Every FRITZ!Box | AVM, Zen, 2degrees |
192.168.10.1 | TRENDnet, Wavlink and repeaters | TRENDnet, Wavlink |
192.168.31.1 | Xiaomi and Redmi routers | Xiaomi |
192.168.11.1 | Buffalo AirStation routers | Buffalo |
192.168.88.1 | MikroTik RouterOS | MikroTik |
192.168.31.l and other typing mistakes
192.168.31.l, with a letter l at the end, never loads. 192.168.3.1 is a real address with a dot in a different place, and it belongs to Huawei routers, covered in the 192.168.3.1 guide.
Questions people ask
Is the admin password the same as the Wi-Fi password?
Often, yes, because setup offers to make them match. They are still two settings, and changing one later does not change the other. If it is the Wi-Fi one you need, here is how to find it.
Can I open 192.168.31.1 on my phone?
Yes, in a browser while the phone is on the router’s Wi-Fi. On mobile data it reaches nothing.
