2degrees Default Modem Passwords
This page lists 2 confirmed default credentials for 2degrees equipment, covering 2 models. The pairing you are most likely to need is admin with the password printed on that unit’s own label.
Entries are reachable over http. All of these entries use a protocol that sends the password in clear text, so use them on a trusted network and change the password once you are in.
admin| Model | Protocol | Access | Username | Password |
|---|---|---|---|---|
| FRITZ!BOX 7530 | HTTP | Admin | leave blank | unique to your unit |
| NOKIA 5G FASTMILE GATEWAY 3 | HTTP | Admin | admin | unique to your unit |
About 2degrees
2degrees supplies FRITZ!Box modems for fibre and Nokia FastMile gateways for 5G broadband.
Reaching the login page
The admin page on most 2degrees units answers at http://192.168.178.1, or at fritz.box if the router is handling your DNS. If that address does not load, the router is whatever your computer lists as its default gateway — ipconfig on Windows or ipconfig getoption en0 router on a Mac will tell you.
The FRITZ!Box 7530 asks only for the FRITZ!Box password on its base. The Nokia FastMile Gateway 3 uses 192.168.1.1 with the login admin and the password beside it on the bottom sticker.
What the 2degrees defaults look like
Usernames vary; admin is the one that appears most, on a single entry. One entry asks for no username at all. On 2 entries the password is unique to each unit and printed on its label.
All of them are reached over a protocol that puts the password on the wire in clear text, so work from a machine on the same wired network rather than across the internet, and change the password once you are in.
Other New Zealand internet providers
Every New Zealand internet provider modem login on one page →
If the 2degrees password has already been changed
FRITZ!Box: unplug for 60 seconds, power on, open fritz.box and choose Forgot your password, then Restore factory settings. Nokia FastMile: hold the Reset hole for 30 seconds.
The catch with an ISP-supplied unit is that a reset also clears the broadband credentials, and on some lines the router will not reconnect until those are re-entered. Find them before you press anything, or be ready to ring the provider.
Other manufacturers
Share This Page