Hyperoptic Default Router Passwords
This page lists 5 confirmed default credentials for Hyperoptic equipment, covering 5 models. The pairing you are most likely to need is admin with the password printed on that unit’s own label.
Entries are reachable over http and https. 4 of these entries use a protocol that sends the password in clear text, so use them on a trusted network and change the password once you are in.
admin5 of 5 entries| Model | Protocol | Access | Username | Password |
|---|---|---|---|---|
| HYPERHUB (ZYXEL EX5601) | HTTPS | Admin | admin | unique to your unit |
| NOKIA HA-140W-B | HTTP | Admin | admin | unique to your unit |
| TILGIN HG2381 | HTTP | Admin | admin | unique to your unit |
| ZTE H298A | HTTP | Admin | admin | unique to your unit |
| ZTE H298N | HTTP | Admin | admin | unique to your unit |
About Hyperoptic
Hyperoptic is a UK full-fibre provider that has supplied Zyxel, Nokia, ZTE and Tilgin routers.
Reaching the login page
The admin page on most Hyperoptic units answers at http://192.168.1.1. If that address does not load, the router is whatever your computer lists as its default gateway — ipconfig on Windows or ipconfig getoption en0 router on a Mac will tell you.
Every Hyperoptic router listed here uses the username admin, with a password unique to the unit on its label or Wi-Fi card.
What the Hyperoptic defaults look like
Every entry uses the username admin. On 5 entries the password is unique to each unit and printed on its label. 4 of them are reached over a protocol that puts the password on the wire in clear text, so work from a machine on the same wired network rather than across the internet, and change the password once you are in.
Where Hyperoptic prints the admin password
If the Hyperoptic password has already been changed
Push a pin or paperclip into the reset hole for 15 seconds.
The catch with an ISP-supplied unit is that a reset also clears the broadband credentials, and on some lines the router will not reconnect until those are re-entered. Find them before you press anything, or be ready to ring the provider.
Share This Page