Verizon Default Router Passwords
This page lists 6 confirmed default credentials for Verizon equipment, covering 6 models. The pairing you are most likely to need is admin with the password printed on that unit’s own label.
Entries are reachable over http and https. 3 of these entries use a protocol that sends the password in clear text, so use them on a trusted network and change the password once you are in.
admin2 of 6 entries| Model | Protocol | Access | Username | Password |
|---|---|---|---|---|
| 5G INTERNET GATEWAY LVSKIHP | HTTP | Admin | leave blank | unique to your unit |
| 5G/LTE HOME INTERNET GATEWAY ASK-NCQ1338 / ASK-NCQ1338FA | HTTPS | Admin | leave blank | unique to your unit |
| 5G/LTE HOME INTERNET GATEWAY WNC-CR200A / ARC-XCI55AX | HTTPS | Admin | leave blank | unique to your unit |
| FIOS QUANTUM GATEWAY G1100 | HTTP | Admin | admin | unique to your unit |
| FIOS ROUTER | HTTP | Admin | admin | unique to your unit |
| VERIZON ROUTER CR1000A | HTTPS | Admin | leave blank | unique to your unit |
About Verizon
Verizon supplies routers for Fios fibre and gateways for its 5G and LTE Home Internet service.
Reaching the login page
The admin page on most Verizon units answers at http://192.168.1.1, or at mynetworksettings.com if the router is handling your DNS. If that address does not load, the router is whatever your computer lists as its default gateway — ipconfig on Windows or ipconfig getoption en0 router on a Mac will tell you.
Every Verizon router and gateway listed here has its own admin password printed on its label. The address depends on the model: older Fios routers answer on myfiosgateway.com, newer ones and the Home Internet gateways on mynetworksettings.com.
What the Verizon defaults look like
admin is the username on 2 of the 6 entries. 4 of them ask for no username at all. On 6 entries the password is unique to each unit and printed on its label.
3 of them are reached over a protocol that puts the password on the wire in clear text, so work from a machine on the same wired network rather than across the internet, and change the password once you are in.
Where Verizon prints the admin password
Which address to use
Fios Quantum Gateway and Fios Router: myfiosgateway.com or 192.168.1.1. Verizon Router CR1000A: mynetworksettings.com or https://192.168.1.1. 5G and LTE Home Internet gateways ASK-NCQ1338: 192.168.0.1; WNC-CR200A and ARC-XCI55AX: 192.168.1.1. The 5G Internet Gateway LVSKIHP answers on http://my.router.
The browser says the page is not safe
Verizon’s newer routers use a certificate your browser does not recognise, so it shows a privacy warning. Verizon’s instruction is to choose Advanced and then Proceed; the page is on your own network.
Changing the admin password
On the 5G and LTE gateways it is under Advanced, then System, then System Settings. The LVSKIHP sign-in page has a Forgot Admin Password link that uses the security question you set.
Verizon firmware and known issues
Verizon publishes no release notes for its routers. The versions below are the ones it lists on its open source software page. The dates are those of the published files, not release dates. Verizon open source software page
Fios Router (G3100)
| Firmware | Date | Notes |
|---|---|---|
3.7.0.4 | File dated April 2026 | |
3.4.0.8 | File dated June 2025 | |
3.2.0.11 | File dated March 2025 |
Versions from Verizon open source software page
Verizon Router (CR1000A and CR1000B)
| Firmware | Date | Notes |
|---|---|---|
3.3.0.10 | File dated March 2025 | CR1000A |
3.3.0.8 | File dated March 2025 | CR1000B |
Versions from Verizon open source software page
Checked 4 October 2026.
If the Verizon password has already been changed
On the Fios Quantum Gateway, hold the red reset button on the back with a paperclip for 15 seconds; that restores the username and password on the side label and removes your custom settings.
The catch with an ISP-supplied unit is that a reset also clears the broadband credentials, and on some lines the router will not reconnect until those are re-entered. Find them before you press anything, or be ready to ring the provider.
Share This Page