Avigilon Default Camera Passwords
This page lists 3 confirmed default credentials for Avigilon equipment, covering 3 models. The pairing you are most likely to need is admin with admin.
Entries are reachable over http. 2 of these entries use a protocol that sends the password in clear text, so use them on a trusted network and change the password once you are in.
adminadmin| Model | Protocol | Access | Username | Password |
|---|---|---|---|---|
| GENERIC | — | — | admin | admin |
| IP CAMERAS MANUFACTURED BEFORE 1 JANUARY 2020 | HTTP | Admin | administrator | no password set |
| IP CAMERAS MANUFACTURED ON OR AFTER 1 JANUARY 2020 | HTTP | Admin | you choose this on first boot | you create this on first boot |
About Avigilon
The entries are logged as CCTV cameras and recorders. 3 distinct Avigilon models are covered.
Reaching the login page
Point a browser at whatever your computer reports as its default gateway. On Windows that is the Default Gateway line from ipconfig; on macOS, Network settings shows it under the active connection.
What the Avigilon defaults look like
Usernames vary; admin is the one that appears most, on a single entry. One model shipped with no password at all. 2 of them are reached over a protocol that puts the password on the wire in clear text, so work from a machine on the same wired network rather than across the internet, and change the password once you are in.
If the Avigilon password has already been changed
Cameras and recorders rarely have an accessible reset button. On a camera it is usually a small switch on the pigtail or under the dome that has to be held while power is applied. On a recorder the reset is normally a jumper or a button on the mainboard, which means opening the case. Several manufacturers will also generate a one-time unlock code from the device serial number and the current date if you contact their support with proof of ownership.
A reset on a recorder wipes the camera list, the recording schedule and the network settings, though it leaves the footage on the disks alone. Write down the IP addresses of the cameras first, because re-adding them one at a time is the slow part.
Share This Page