Avaya Default Router Passwords
This page lists 12 confirmed default credentials for Avaya equipment, covering 8 models. The pairing you are most likely to need is root with danger.
Entries are reachable over multi, console and snmp. 1 of these entries use a protocol that sends the password in clear text, so use them on a trusted network and change the password once you are in.
root3 of 12 entriesdanger2 of 12 entries| Model | Protocol | Access | Username | Password |
|---|---|---|---|---|
| CAJUN Rev. P550R P580 P880 AND P882 | MULTI | Developer | diag | danger |
| CAJUN Rev. P550R P580 P880 AND P882 | MULTI | Developer | manuf | xxyyzz |
| CAJUN P33X Rev. FIRMWARE BEFORE 3.11.0 | SNMP | Admin | leave blank | admin |
| CAJUN PXXX | MULTI | Admin | root | root |
| CMS SUPERVISOR Rev. 11 | CONSOLE | Admin | root | cms500 |
| DEFINITY Rev. UP TO REV. 6 | ANY | Admin | craft | crftpw |
| DEFINITY Rev. G3SI | MULTI | Admin | craft | no password set |
| DEFINITY | MULTI | Admin | dadmin | dadmin01 |
| G3R Rev. V6 | CONSOLE | Admin | root | ROOT500 |
| J169 / J179 IP PHONE (J100 SERIES), SIP R1.5 | CONSOLE | Admin | leave blank | 27238 |
| PXXX Rev. 5.2.14 | MULTI | Admin | diag | danger |
| PXXX Rev. 5.2.14 | MULTI | Admin | manuf | xxyyzz |
About Avaya
Avaya was spun out of Lucent in 2000 and sells enterprise telephony and contact-centre systems. The Avaya records here run across the Cajun line.
Reaching the login page
Point a browser at whatever your computer reports as its default gateway. On Windows that is the Default Gateway line from ipconfig; on macOS, Network settings shows it under the active connection.
What the Avaya defaults look like
root is the username on 3 of the 12 entries. 2 of them ask for no username at all. One model shipped with no password at all.
Where one is set, danger comes up most often, on 2 entries. There are 9 different passwords across the Avaya set, so check your exact model rather than assuming. One of them is reached over a protocol that puts the password on the wire in clear text, so work from a machine on the same wired network rather than across the internet, and change the password once you are in.
If the Avaya password has already been changed
There is a recessed reset button on the back or underneath that needs a straightened paperclip. Hold it in for thirty seconds with the unit powered on. Let go when the lights change pattern, and give it a couple of minutes to come back up.
A reset clears more than the password. The Wi-Fi name and key go back to what is printed on the label, port forwards and firewall rules are discarded, and any static addressing is lost. Photograph the settings pages first — it takes two minutes and saves an evening.
Share This Page