Telindus Default Router Passwords
This page lists 3 confirmed default credentials for Telindus equipment, covering 3 models. The pairing you are most likely to need is admin with admin.
Entries are reachable over http and telnet. All of these entries use a protocol that sends the password in clear text, so use them on a trusted network and change the password once you are in.
admin2 of 3 entriesadmin2 of 3 entries| Model | Protocol | Access | Username | Password |
|---|---|---|---|---|
| 1124 | HTTP | Admin | leave blank | no password set |
| SHDSL1421 Rev. YES | HTTP | Admin | admin | admin |
| TELINDUS Rev. 2002 | TELNET | Admin | admin | admin |
About Telindus
3 distinct Telindus models are covered.
Reaching the login page
Point a browser at whatever your computer reports as its default gateway. On Windows that is the Default Gateway line from ipconfig; on macOS, Network settings shows it under the active connection.
What the Telindus defaults look like
admin is the username on 2 of the 3 entries. One entry asks for no username at all. One model shipped with no password at all.
Where one is set, admin comes up most often, on 2 entries. All of them are reached over a protocol that puts the password on the wire in clear text, so work from a machine on the same wired network rather than across the internet, and change the password once you are in.
If the Telindus password has already been changed
There is a recessed reset button on the back or underneath that needs a straightened paperclip. Hold it in for thirty seconds with the unit powered on. Let go when the lights change pattern, and give it a couple of minutes to come back up.
A reset clears more than the password. The Wi-Fi name and key go back to what is printed on the label, port forwards and firewall rules are discarded, and any static addressing is lost. Photograph the settings pages first — it takes two minutes and saves an evening.
Share This Page