PCD Default Router Passwords
This page lists 2 confirmed default credentials for PCD equipment. The pairing you are most likely to need is admin with C1@r0.
Entries are reachable over default wifi.
adminC1@r0| Model | Protocol | Access | Username | Password |
|---|---|---|---|---|
| J600 | — | http://192.168.0.1 | admin | C1@r0 |
| J600 | DEFAULT WIFI | — | SSID: Claro-XXXXXX | clar0123 |
About PCD
All 2 PCD records we hold are for the J600.
Reaching the login page
Point a browser at whatever your computer reports as its default gateway. On Windows that is the Default Gateway line from ipconfig; on macOS, Network settings shows it under the active connection. None of the PCD entries here are for a web interface — they are reached over default wifi, which means a terminal or a serial console rather than a browser.
What the PCD defaults look like
Usernames vary; admin is the one that appears most, on a single entry.
If the PCD password has already been changed
This is not hardware you reset with a paperclip. Recovery runs through the console port: interrupt the boot sequence, tell the bootloader to ignore the saved configuration, start up, read or clear the password, then save and reboot. The exact key sequence differs by platform and is in the vendor documentation under password recovery.
You need physical access and a serial cable for this, which is deliberate. Anything reachable only over the network cannot be recovered this way.
Share This Page