MyRepublic Default Router Passwords
This page lists 3 confirmed default credentials for MyRepublic equipment, covering 3 models. The pairing you are most likely to need is admin with admin.
Entries are reachable over http. All of these entries use a protocol that sends the password in clear text, so use them on a trusted network and change the password once you are in.
admin2 of 3 entriesadmin2 of 3 entries| Model | Protocol | Access | Username | Password |
|---|---|---|---|---|
| ASUS ROUTER | HTTP | Admin | admin | admin |
| HUAWEI FG736 MESH | HTTP | Admin | unique to your unit | unique to your unit |
| WI-FI HALO | HTTP | Admin | admin | admin |
About MyRepublic
MyRepublic supplies Huawei mesh, ASUS and its own Wi-Fi Halo routers in Singapore.
Reaching the login page
The admin page on most MyRepublic units answers at http://192.168.1.1. If that address does not load, the router is whatever your computer lists as its default gateway — ipconfig on Windows or ipconfig getoption en0 router on a Mac will tell you.
The ASUS routers and the older Wi-Fi Halo use admin and admin. The Huawei FG736 mesh answers on 192.168.101.1 and prints its own username and password on the nameplate on the back.
What the MyRepublic defaults look like
admin is the username on 2 of the 3 entries. Where one is set, admin comes up most often, on 2 entries. All of them are reached over a protocol that puts the password on the wire in clear text, so work from a machine on the same wired network rather than across the internet, and change the password once you are in.
If the MyRepublic password has already been changed
ASUS: hold Reset for 10 to 15 seconds while the router is on, until the power light flashes. Wi-Fi Halo: hold Reset with a pin for 10 to 20 seconds.
The catch with an ISP-supplied unit is that a reset also clears the broadband credentials, and on some lines the router will not reconnect until those are re-entered. Find them before you press anything, or be ready to ring the provider.
Share This Page