Breezecom Default Router Passwords
This page lists 6 confirmed default credentials for Breezecom equipment.
Entries are reachable over console.
Master2 of 6 entries| Model | Protocol | Access | Username | Password |
|---|---|---|---|---|
| BREEZECOM ADAPTERS Rev. 3.X | — | Admin | leave blank | Master |
| BREEZECOM ADAPTERS Rev. 2.X | — | Admin | leave blank | laflaf |
| BREEZECOM ADAPTERS Rev. 4.X | — | — | leave blank | Super |
| BREEZECOM ADAPTERS Rev. 3.X | — | — | leave blank | Master |
| BREEZECOM ADAPTERS Rev. 2.X | — | — | leave blank | laflaf |
| BREEZECOM ADAPTERS Rev. 4.4.X | CONSOLE | Admin | leave blank | Helpdesk |
About Breezecom
All 6 Breezecom records we hold are for the BREEZECOM ADAPTERS.
Reaching the login page
Point a browser at whatever your computer reports as its default gateway. On Windows that is the Default Gateway line from ipconfig; on macOS, Network settings shows it under the active connection. None of the Breezecom entries here are for a web interface — they are reached over console, which means a terminal or a serial console rather than a browser.
What the Breezecom defaults look like
None of them ask for a username; the field is left empty. Where one is set, Master comes up most often, on 2 entries.
If the Breezecom password has already been changed
This is not hardware you reset with a paperclip. Recovery runs through the console port: interrupt the boot sequence, tell the bootloader to ignore the saved configuration, start up, read or clear the password, then save and reboot. The exact key sequence differs by platform and is in the vendor documentation under password recovery.
You need physical access and a serial cable for this, which is deliberate. Anything reachable only over the network cannot be recovered this way.
Share This Page