X-Micro Default Router Passwords
This page lists 3 confirmed default credentials for X-Micro equipment, covering 2 models. The pairing you are most likely to need is super with super.
Entries are reachable over multi and http. 1 of these entries use a protocol that sends the password in clear text, so use them on a trusted network and change the password once you are in.
super2 of 3 entriessuper2 of 3 entries| Model | Protocol | Access | Username | Password |
|---|---|---|---|---|
| WLAN 11B ACCESS POINT Rev. 1.2.2 | MULTI | Admin | super | super |
| X-MICRO WLAN 11B BROADBAND ROUTER Rev. 1.6.0.1 | HTTP | Admin | 1502 | 1502 |
| X-MICRO WLAN 11B BROADBAND ROUTER Rev. 1.2.2 1.2.2.3 1.2.2.4 1.6.0.0 | MULTI | Admin | super | super |
About X-Micro
X-Micro produced consumer networking and multimedia hardware.
Reaching the login page
The admin page on most X-Micro units answers at http://192.168.1.1. If that address does not load, the router is whatever your computer lists as its default gateway — ipconfig on Windows or ipconfig getoption en0 router on a Mac will tell you.
What the X-Micro defaults look like
super is the username on 2 of the 3 entries. Where one is set, super comes up most often, on 2 entries. One of them is reached over a protocol that puts the password on the wire in clear text, so work from a machine on the same wired network rather than across the internet, and change the password once you are in.
If the X-Micro password has already been changed
There is a recessed reset button on the back or underneath that needs a straightened paperclip. Hold it in for thirty seconds with the unit powered on. Let go when the lights change pattern, and give it a couple of minutes to come back up.
A reset clears more than the password. The Wi-Fi name and key go back to what is printed on the label, port forwards and firewall rules are discarded, and any static addressing is lost. Photograph the settings pages first — it takes two minutes and saves an evening.
Share This Page