VIVOTEK Default Camera Passwords
This page lists 1 confirmed default credential for VIVOTEK equipment. The pairing you are most likely to need is root with no password at all.
root| Model | Protocol | Access | Username | Password |
|---|---|---|---|---|
| GENERIC | — | — | root | no password set |
About VIVOTEK
VIVOTEK is a Taiwanese manufacturer of IP surveillance cameras and recorders.
Reaching the login page
The admin page on most VIVOTEK units answers at http://192.168.0.99. If that address does not load, the router is whatever your computer lists as its default gateway — ipconfig on Windows or ipconfig getoption en0 router on a Mac will tell you.
If the VIVOTEK password has already been changed
Cameras and recorders rarely have an accessible reset button. On a camera it is usually a small switch on the pigtail or under the dome that has to be held while power is applied. On a recorder the reset is normally a jumper or a button on the mainboard, which means opening the case. Several manufacturers will also generate a one-time unlock code from the device serial number and the current date if you contact their support with proof of ownership.
A reset on a recorder wipes the camera list, the recording schedule and the network settings, though it leaves the footage on the disks alone. Write down the IP addresses of the cameras first, because re-adding them one at a time is the slow part.
Share This Page