Micronet Default Router Passwords
This page lists 4 confirmed default credentials for Micronet equipment, covering 4 models. The pairing you are most likely to need is admin with epicrouter.
Entries are reachable over multi, telnet and console. 1 of these entries use a protocol that sends the password in clear text, so use them on a trusted network and change the password once you are in.
admin2 of 4 entriesepicrouter| Model | Protocol | Access | Username | Password |
|---|---|---|---|---|
| 3351 / 3354 | MULTI | Admin | admin | epicrouter |
| ACCESS POINT Rev. SP912 | TELNET | Admin | root | default |
| MICRONET SP5002 | CONSOLE | Admin | mac | no password set |
| SP918GK | — | Admin | admin | 1234 |
About Micronet
Micronet makes routers, switches and media converters.
Reaching the login page
The admin page on most Micronet units answers at http://192.168.1.1. If that address does not load, the router is whatever your computer lists as its default gateway — ipconfig on Windows or ipconfig getoption en0 router on a Mac will tell you.
What the Micronet defaults look like
admin is the username on 2 of the 4 entries. One model shipped with no password at all. One of them is reached over a protocol that puts the password on the wire in clear text, so work from a machine on the same wired network rather than across the internet, and change the password once you are in.
If the Micronet password has already been changed
There is a recessed reset button on the back or underneath that needs a straightened paperclip. Hold it in for thirty seconds with the unit powered on. Let go when the lights change pattern, and give it a couple of minutes to come back up.
A reset clears more than the password. The Wi-Fi name and key go back to what is printed on the label, port forwards and firewall rules are discarded, and any static addressing is lost. Photograph the settings pages first — it takes two minutes and saves an evening.
Share This Page