3M Default Router Passwords
This page lists 1 confirmed default credential for 3M equipment. The pairing you are most likely to need is volition with volition.
Entries are reachable over snmp. All of these entry use a protocol that sends the password in clear text, so use them on a trusted network and change the password once you are in.
volitionvolition| Model | Protocol | Access | Username | Password |
|---|---|---|---|---|
| VOL-0215 ETC. | SNMP | Admin | volition | volition |
About 3M
The single record we hold is for the VOL-0215 ETC..
Reaching the login page
Point a browser at whatever your computer reports as its default gateway. On Windows that is the Default Gateway line from ipconfig; on macOS, Network settings shows it under the active connection. None of the 3M entries here are for a web interface — they are reached over snmp, which means a terminal or a serial console rather than a browser.
If the 3M password has already been changed
This is not hardware you reset with a paperclip. Recovery runs through the console port: interrupt the boot sequence, tell the bootloader to ignore the saved configuration, start up, read or clear the password, then save and reboot. The exact key sequence differs by platform and is in the vendor documentation under password recovery.
You need physical access and a serial cable for this, which is deliberate. Anything reachable only over the network cannot be recovered this way.
Share This Page