Zebra Default Printer Passwords
This page lists 9 confirmed default credentials for Zebra equipment, covering 9 models. The pairing you are most likely to need is admin with 1234.
Entries are reachable over http, multi and ftp. 7 of these entries use a protocol that sends the password in clear text, so use them on a trusted network and change the password once you are in.
admin6 of 9 entries12346 of 9 entries| Model | Protocol | Access | Username | Password |
|---|---|---|---|---|
| 10/100 PRINT SERVER | MULTI | Admin | admin | 1234 |
| P100I / P110I / P110M / P120I / P330I / P430I CARD PRINTERS | HTTP | Admin | admin | 1234 |
| ZC100 / ZC300 / ZC350 CARD PRINTERS | HTTP | Admin | admin | admin |
| ZEBRANET 10/100 INTERNAL AND EXTERNAL PRINT SERVERS – PRINT SERVER WEB PAGE | HTTP | Admin | admin | 1234 |
| ZEBRANET-EQUIPPED PRINTERS – FTP | FTP | Admin | leave blank | no password set |
| ZEBRANET-EQUIPPED PRINTERS – PRINTER HOME PAGE, TELNET AND FRONT PANEL LCD MENU | MULTI | Admin | leave blank | 1234 |
| ZXP SERIES 1 AND ZXP SERIES 3 CARD PRINTERS | HTTP | Admin | admin | 1234 |
| ZXP SERIES 7 AND ZXP SERIES 8 CARD PRINTERS (INITIAL FIRMWARE RELEASES) | HTTP | Admin | root | no password set |
| ZXP SERIES 7 AND ZXP SERIES 8 CARD PRINTERS (NEWER FIRMWARE) | HTTP | Admin | admin | 1234 |
About Zebra
The Zebra records here run across the ZebraNet line. The entries are logged as printers and multifunction devices and routers and gateways.
Reaching the login page
Point a browser at whatever your computer reports as its default gateway. On Windows that is the Default Gateway line from ipconfig; on macOS, Network settings shows it under the active connection.
What the Zebra defaults look like
admin is the username on 6 of the 9 entries. 2 of them ask for no username at all. 2 of them shipped with no password at all.
Where one is set, 1234 comes up most often, on 6 entries. 7 of them are reached over a protocol that puts the password on the wire in clear text, so work from a machine on the same wired network rather than across the internet, and change the password once you are in.
If the Zebra password has already been changed
There is a recessed reset button on the back or underneath that needs a straightened paperclip. Hold it in for thirty seconds with the unit powered on. Let go when the lights change pattern, and give it a couple of minutes to come back up.
A reset clears more than the password. The Wi-Fi name and key go back to what is printed on the label, port forwards and firewall rules are discarded, and any static addressing is lost. Photograph the settings pages first — it takes two minutes and saves an evening.
Share This Page